Products

Popular products

Products
Kategorier
Varumärken

Kategorier

Inga Kategorier hittades.

Varumärken

Inga Varumärken hittades.
Inga Kategorier hittades.
Inga Varumärken hittades.
Laddar...
  • chevron_leftBack

Equipment & clothing · buying guide

CE marking on martial arts protective equipment – what does it mean?

CE marking appears on many types of protective equipment for martial arts. The marking shows that the manufacturer has assessed the product against the EU regulations that apply to the product and assures that it meets the applicable health and safety requirements.

For martial arts equipment, CE marking is particularly relevant to products classified as personal protective equipment (PPE).

At the same time, it is important to know that CE marking is not a general quality mark or a competition approval. Not all martial arts products must be CE-marked either.

What does CE marking mean?

When a manufacturer CE marks a product, the manufacturer assures that the product meets the applicable requirements of the relevant EU legislation and that the correct conformity assessment procedure has been carried out.

For personal protective equipment, this is mainly regulated by EU regulation 2016/425 on personal protective equipment.

The CE marking makes it possible for products that meet the rules to be provided on the market within the EU and EEA.

However, CE does not mean that the product:

  • is approved or recommended by the EU
  • is automatically better than any other product
  • is approved by a specific martial arts association
  • protects against all types of damage
  • is manufactured within the EU.

Which martial arts products must be CE marked?

The decisive factor is not only what type of product it is, but what protection the product is designed and marketed to provide.

A product is considered personal protective equipment when it is designed to be worn or held by a person to protect the person against one or more risks to health or safety.

This means that many protections used in karate, taekwondo, kickboxing, Muay Thai, MMA, boxing and other martial arts can be covered.

Examples include headguards, shin guards, instep and foot protection, forearm guards, body and breast protectors, groin guards, and certain hand and foot protectors.

However, exact classification is determined by the product's construction and intended area of use. It is therefore not possible to determine whether a product should be CE marked based solely on the fact that it is called, for example, "boxing glove" or "martial arts protective equipment".

Not all martial arts products should have CE marking

Products that are not covered by any EU legislation that requires CE marking must not be CE marked.

Common martial arts uniforms, belts, training clothes, bags and other equipment that is not intended to function as personal protective equipment are therefore normally not covered by the PPE regulation's requirement for CE marking.

The fact that a product lacks a CE mark does not automatically mean that something is wrong. The question is first and foremost whether the product type and its intended function are covered by legislation that requires CE marking.

Even products that are not subject to requirements for CE marking must of course comply with specific product safety regulations.

EN 13277 – standards for martial arts protective equipment

For personal protective equipment in martial arts there is the European standard series EN 13277 – Protective equipment for martial arts.

The standards describe various requirements and testing methods for martial arts protective equipment.

Standard Area
EN 13277-1 General requirements and test methods for martial arts protective equipment
EN 13277-2 Instep, shin and forearm protectors
EN 13277-3 Torso and body protection
EN 13277-4 Head protection
EN 13277-5 Genital and abdominal protectors
EN 13277-6 Breast protectors
EN 13277-7 Hand and foot protection
EN 13277-8 Face protection for karate

The standards are used together with the general safety requirements of the EU's PPE regulation.

The use of a harmonized standard is a common way for a manufacturer to demonstrate that the product meets the relevant safety requirements. However, there may be other technical means of demonstrating compliance with the legislation.

What is tested on martial arts protective equipment?

The properties tested depend on the type of protector.

Testing can cover impact attenuation, the area protected, fit and ergonomics, retention in the correct position, materials and construction.

A head protector, for example, has different requirements than a shin guard or a jockstrap. Therefore, there are different parts of the EN 13277 series for different types of protection.

The aim is not to make it impossible to injure yourself. Martial arts always contain a certain risk of injury. Protective equipment is designed to reduce specified risks, not eliminate them completely.

Different categories of personal protective equipment

The EU's PPE regulation divides personal protective equipment into three risk categories.

Category I covers specified minimal risks. The applicable conformity assessment is carried out by the manufacturer.

Category II includes risks that do not belong to category I or III. Many types of sports and martial arts protective equipment fall into this category. For category II, EU type-examination by a notified independent body is required before the product can be placed on the market.

Category III covers the specific risks listed in the regulation that may cause very serious consequences, such as death or irreversible harm to health. A product does not automatically fall into Category III because an injury could be serious. This category has additional requirements for production control.

The exact categorization depends on the product's intended protective function and the risks it is designed for.

Must there be a number after the CE mark?

Not always.

A common misunderstanding is that a correct CE mark must always be followed by a four-digit number.

This does not apply to general personal protective equipment in category II. A four-digit number after the CE mark is used for category III, where the number identifies the notified body that participates in the ongoing control of production.

The fact that a martial arts product only has the CE symbol itself does not therefore necessarily mean that the marking is incorrect.

EU Declaration of Conformity

For CE-marked personal protective equipment, the manufacturer must draw up an EU Declaration of Conformity (DoC).

Through the document, the manufacturer assures that the product complies with relevant EU legislation.

The EU declaration must accompany the product or be available via a web address specified in the accompanying instructions for use.

The product must also be accompanied by relevant information and instructions for use. The user manual must be available in the language or languages ​​required in the country where the product is sold. A translated shop page does not replace the manufacturer's user manual.

Where can you find the CE marking?

The CE mark must normally be visible, legible and permanently placed on the product itself.

If the size or construction of the product makes this inappropriate or impossible, the marking can instead be found on the packaging and in accompanying documentation.

On the protective equipment or its documentation, you can also find, for example, model designation, manufacturer information, size, relevant standard and information about the product's intended protection.

CE marking and federation approval

CE marking and approval by a martial arts association should not be confused.

The CE marking means that the product complies with the EU legislation that applies to the product.

Federation approval or competition approval means that the equipment meets the rules of a specific martial arts federation or competition organization.

A CE-marked product is therefore not automatically allowed at all competitions.

International and national associations can, for example, set special requirements for color, construction, thickness, weight, model or which brands and product models may be used.

If you are going to compete, we therefore always recommend that you check the current rules for your martial art and your association.

CE marking does not replace correct size and fit

Even correctly tested and CE-marked equipment needs to fit the user and be used correctly to provide its intended protection.

An oversized shin guard can move out of position. A headguard that is too small can fit incorrectly and cause discomfort. Worn or damaged equipment may offer reduced protection.

Therefore, always follow the manufacturer's instructions regarding size, use, care and when the protection should be replaced. Exact size guides can be found in each product's description, as fit and measurements vary between different brands and models.

Frequently asked questions about CE marking for martial arts

Does all martial arts protective equipment need CE marking?

Protection that legally counts as personal protective equipment and is covered by the EU's PPE regulation must be correctly CE-marked when it is released on the EU market. The assessment depends on the intended function of the product and the risk it is designed to protect against.

Is a CE marked product approved by the EU?

No. The CE mark is not an approval mark from the EU or any authority. Through the label, the manufacturer declares that the product complies with applicable EU legislation after the correct assessment procedure has been carried out.

Does CE mean that the product is the best or safest?

No. The CE marking shows compliance with applicable legal requirements. It does not compare comfort, durability, material quality or level of protection between different products.

Are CE and EN 13277 the same thing?

No. The CE mark is the statutory mark. EN 13277 is a series of European standards with technical requirements and test methods for different types of martial arts protective equipment.

Does CE-marked martial arts protective equipment have to be manufactured within the EU?

No. The product can be manufactured anywhere in the world. The CE marking is about compliance with EU product regulations, not about the product's country of origin.

Is CE marking enough for competition?

Not necessarily. Competition organizers and martial arts associations may have their own requirements and approvals in addition to the statutory product requirements. Therefore, always check the rules before the competition.

Summary

CE marking is an important part of the safety rules for personal protective equipment in martial arts. The marking shows that the manufacturer declares that the product meets the applicable EU requirements and that the correct conformity assessment has been carried out.

For martial arts, there is the standard series EN 13277, which deals with several types of protection for, among other things, the head, torso, legs, forearms, hands, feet, chest and abdomen. Which standard and edition is used must be stated in the product's documentation. Presumption of conformity applies only to the requirements covered by a harmonized standard whose reference is published for the relevant regulatory framework.

Remember that CE marking is neither a quality rating nor a competition approval. Choose equipment intended for your martial art, with a secure fit, that meets the rules of your club or federation.

Read more about personal protective equipment at the Swedish Consumer Agency, Konsumentverket

Related guides